All Projects Jason Has Woked On

2023

Installed at Salt Lake City International Airport

Gateway Sculpture standing 90 ft tall. Materials consist of weathering steel with elements of glass and powder-coated steel.

Jason’s Role: I managed this project from schematic design through onsite installation.

End of Watch

Installed at San Jose, CA Police Department

Materials consist of brushed polish stainless steel and safety laminated and etched dichroic glass.

Jason’s Role: Managed schematic design phase. Managed the beginning stages of the Design Development Phase. Provided support to the team as needed through the DD and Fabrication Phases. Onsite installation.

Hoberman Arch Refurbishment and Reinstallation

Original Artist Chuck Hoberman for the 2002 Olympics

Contracted by Gordon Huether Studio

Installed at Salt Lake International Airport

Materials consist of 96 aluminum panels, lumicite backing, powered coated steel arch, steel base, alucabond cladding panels, color changing light cannons

Jason’s Role: I managed locating the existing parts, identifying damaged and missing parts, development and execution of refurbishment and re-installation plan.

The Peaks

Oculus

Installed at Fort Wayne International Airport

Materials consist of square and rectangular brushed finish stainless steel tube, waterjet and powder coated steel, safety laminated dichroic round suspended by stainless steel cables.

Jason’s Role: I was involved in the development of the concept during the Finalist stage of the project through the initial stages of Design Development. I offered support to the team as the project moved through DD and Fabrication Phases and took the project back over upon Fabrication Completion to complete the mockup and onsite installation of the sculpture.

2022

Santa Rosa Veteran’s Memorial

Installed at Veteran’s Outpatient Clinic in Santa Rosa, CA

Materials consist of weathering steel, stainless steel, safety laminated dichroic glass

Jason’s Role: I offered minimal support through the Design Development Phase, managed and participated in the Mockup upon Fabrication Completion, and managed and participated in onsite installation

Red Head

Designed Fabricated by Gordon Huether Studio

Installed in a Private Residence in Sacramento, CA

Materials consist of hand-rolled and powder-coated steel tubes, with an acrylic sphere internally lit.

Jason’s role: Manage and assist in the installation of the sculpture after purchase from On Spec Sculpture Collection

Big Leaf

Installed at Dixie State University in St. George, UT

Materials consist of weathering steel

Jason’s role: I took over this project partway through the installation. After some hiccups with the previous PMs, there were a lot of issues to iron out. I worked with engineers to resolve all of the site work issues to support the sculpture, onsite management of site work execution, personally accepted sculpture shipment in Houston, TX to expedite customs issues, coordinated shipping from TX to UT, located storage for sculpture, managed and participated in onsite installation.

2021

Trax Canyon Refurbishment and Re-Installation

Designed and Fabricated by Gordon Huether Studio

Installed at Salt Lake International Airport

Materials Consists of welded and powder-coated steel flat bar

Jason’s Role: This project was fabricated and installed for the Trax Station located at the original SLC Airport in 2010. When the new airport was opened, this sculpture was removed and almost forgotten. I was engaged to have the damage caused during decommissioning to be repaired, new powder coating to all elements, and reinstalling the sculpture.

Hubcaps

Installed at Redwood City Public Parking Garage

Materials consist of stainless steel structure with stainless steel cables to fasten hubcaps to with stainless steel zip ties

Jason’s Role: I was responsible for managing and participating in the mockup of the sculpture upon fabrication completion, as well as supporting site work approval and onsite installation.

Spectorium

Installed at 465 North Mary Ave in Sunnyvale, CA for Jay Paul Real Estate Firm

Materials consist of brushed finish stainless steel tube and safety laminated dichroic glass

Jason’s Role: I was responsible for managing and participating in the mockup of the sculpture upon fabrication completion, as well as supporting site work approval and onsite installation.

Retaining Wall

Luminaria - Victims of Gun Violence Memorial

Silver Lantern

Private Residence in Clearlake Oaks, CA

I was engaged to assist a resident in replacing a failing retaining wall located in the Clearlake Oaks Keys. The retaining wall had been washed out due to flooding, and the back deck of the residence was in danger of collapsing. I designed a new retaining wall and executed the plan to replace the retaining wall during the dry season of the area.

Installed at Albuquerque, NM DA’s Office

Materials consist of waterjet, welded and powder-coated steel

Jason’s Role: I was responsible for the installation of sculptures.

Installed at 625 North Mathilda, Sunnyvale, CA, for Jay Paul Real Estate Firm

Materials consist of Stainless Steel and Safety Laminated Dichroic Glass

Jason’s Role: I was responsible for managing and participating in the mockup of the sculpture upon fabrication completion, as well as supporting site work approval and onsite installation.

2020

World Map

Original Designer Unknown

Contracted by Gordon Huether Studio

Installed in the Meeter Greeter room of Salt Lake International Airport

Materials consist of 10ft by 10ft by 2in Frit Printed Glass

Jason’s Role: This project was a recreation of the iconic World Map that was originally installed as a terrazzo floor piece in the original SLCDA terminal. I worked with a high-resolution photographer to document the piece, engaged a fabricator to transcribe it onto glass, and finally engaged an installer to install it. I was intimately involved in every step of the project.

The Falls

Installed in Salt Lake International Airport

Materials consist of custom composite, high-density foam, and internal steel structures.

Jason’s Role: I was responsible for working with Gordon through Schematic Design, with fabricators and engineers through Design Development, managing the Fabrication Phase to ensure quality expectations were met, developing an installation plan, testing the plan during a mockup, and leading a team in the onsite installation of the final product.

Plates and Benches

Materials consist of stainless steel cables, custom attachment brackets, and safety laminated dichroic glass

Jason’s Role: I was responsible for taking Gordon’s schematic design and working with fabricators and engineers to develop fabrication and installation methods to safely execute this design. I closely managed the fabrication of each element, developed the complicated details to safely install the sculpture, and worked with installers onsite to ensure successful installation.

The Canyon

Installed in Salt Lake International Airport

Materials consist of 3D custom rolled aluminum tubes clad in fabric

Jason’s Role: I was responsible for taking the schematic concept that Gordon developed, working with the Airport Engineers to determine load limits of the structure, researching and developing the appropriate materials and fabrication methods to execute the concept, interviewing and identifying the appropriate fabricator, managing fabrication process, and onsite oversight of installation.

2019

Up We Go

Designed and Fabricated by Gordon Huether Studio

Installed in Flower Mound, Texas, for the Lakeside Community Development

Materials consist of custom extruded aluminum and safety laminated dichroic glass

Jason’s Role: I was responsible for developing and managing the fabrication of this sculpture as an on-spec project. We installed this sculpture in a number of locations to display it as a “loaner” to different agencies until the Lakeside Development purchased it to be installed in their community. I led the onsite installation of this sculpture.

Cloud Fountain

Installed at Elk Grove, CA Community Center

Materials consist of custom rolled aluminum tubing welded to an aluminum plate frame

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and Fabrication, and I led a team in the onsite installation.

All In

Designed and Fabricated by Gordon Huether Studio

Installed at Clemson University in South Carolina

Materials consist of aluminum and safety laminated dichroic glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

2018

Designed and Fabricated by Gordon Huether Studio

Installed at Redondo Beach Performing Arts Center

Materials consist of powder-coated aluminum backing and laser-cut aluminum sheet

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Designed and Fabricated by Gordon Huether Studio

Installed in Fresno Town Center

Materials consist of 1” waterjet and powder-coated steel plate

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Waves

Trees of Life

Designed and Fabricated by Gordon Huether Studio

Installed at BioMarin facility located in San Rafael, CA

Materials consist of 5/8” waterjet cut weathering steel, with etched “love locks” attached with stainless steel rings

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Acero Picados

Velocity

Designed and Fabricated by Gordon Huether Studio

Installed in a staircase leading to Ashland, OR Performing Arts Center

Materials consist of brush-finished aluminum tube, custom-designed/fabricated aluminum support boots, 48” acrylic sphere, internally integrated LED drop lights, internally integrated LED color changing lights

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

2017

Words We Live By

Round About The Mountain

Designed and Fabricated by Gordon Huether Studio

Installed as a light screen for a roundabout located in Veil, CO

Materials consist of Waterjet weathering steel with internally integrated lighting

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Designed and Fabricated by Gordon Huether Studio

Installed on Curtain Wall of Salt Lake City DA’s Office

Materials consist of custom-etched and laminated dichroic glass with Frenzel lenses

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Bamboo Forest

Designed and fabricated by Gordon Huether Studio

Installed in Private Residence located in Palo Alto, CA

Materials consist of Acrylic tube, custom acrylic sheet, internally integrated LED lighting

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, in-house fabrication, and installation logistics support.

Fork

Designed and Fabricated by Gordon Huether Studio

Installed at CIA at Copia in Napa, CA

Materials consist of stainless steel structure clad in thousands of forks

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

The Basket

Designed and Fabricated by Gordon Huether Studio

Installed at Archer Hotel in Napa, CA

Materials consist of polished aluminum tubes, aluminum plates, aluminum sheets, and dichroic glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

2016

Designed and Fabricated by Gordon Huether

Installed in the Chapel of Stamford Hospital in Stamford, CT

Materials consist of 1” hand-etched tempered glass, with custom fused glass laminated to both surfaces

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and fabrication, and I led a team in the onsite installation.

Over the Moon

Designed and Fabricated by Gordon Huether Studio

Installed at Citiline's Work/Play/Live Community located in Dallas, TX

Materials consist of aluminum internal framing, hand-crafted and hard-coated foam cladding, internal color-changing LED lighting, custom cow fabricated by Flatfork Studios

Jason’s Role: I was intimately involved in all aspects of this project. This project required a lot of R&D to develop materials and fabrication methods to find the best methods to achieve this concept within the budget. I worked closely with GHS’s in-house fabrication team, testing fabrication methods and developing the best process. The Lead Fabricator and I installed this sculpture ourselves on-site.

Tarantula

Designed and Fabricated by Gordon Huether Studio

Installed at Morgan Hill, CA Public Parking Facility

Materials consist of powder-coated aluminum and repurposed motorcycle headlights with bulbs replaced with LED lamps

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Poppy Jasper

Installed at Morgan Hill, CA Public Parking Facility

Materials consist of Interlayer Printed Glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, outsourced fabrication, and led a team in the onsite installation. During the Design Development phase, I sourced the Poppy Jasper to be used during high res photography, which was then transcribed into large-scale printing for the curtain wall

Designed and Fabricated by Gordon Huether Studio

Installed at the entrance to a housing development located in Lafayette, CA

Materials consist of brush-polished stainless steel tubes and safety laminated dichroic glass rounds

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Spectrum

On the Move #2

Water Ways

Designed and Fabricated by Gordon Huether Studio

Installed at the Parking Garage of Illif Transit Station in Aurora, CO

Materials consist of custom-engineered and extruded aluminum, with dichroic rounds installed to allow movement in the wind

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Designed and Fabricated by Gordon Huether Studio

Installed within Roundabout in Dadeland, FL

Materials consist of polished stainless steel pipes and safety laminated dichroic glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication. I coordinated the logistics for this installation but did not participate in the onsite installation with the GHS team.

Waves of Change

Lollipops

Designed and Fabricated by Gordon Huether studio

Installed at Rockland County, NY Courthouse

Materials consist of weathering steel and hand-etched tempered glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

2015

Ward’s Corner

Designed and Fabricated by Gordon Huether studio

Installed in Norfolk, VA

Materials consist of acrylic storm panels with lamination of historical neighborhood map, secured to an aluminum pedestal

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Spirale

Designed and Fabricated by Gordon Huether studio

Installed at Provenance Vineyards in Rutherford, CA

Materials consist of hand-polished aluminum rectangular tube

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

In Honor of the Fallen

Designed and Fabricated by Gordon Huether studio

Installed at Oklahoma City Police Department

Materials consist of aluminum arches with integrated dichroic glass elements and hand-fused tiles embedded into the hardscaping of the plaza.

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

2014

Price Sculpture

Installed at Private Residence

Materials consist of steel and custom fused glass laminated to tempered glass

Jason’s Role: I was intimately involved in managing this project through Schematic Design, Design Development, and in-house fabrication, and I led a team in the onsite installation.

Pearl Street Plaza

Designed and Fabricated by Gordon Huether studio

Installed at Pearl Street Plaza in Bethesda, MD

Materials consist of custom-painted steel panels with chipped glass elements integrated

Jason’s Role: This project was fabricated by the time I joined the GHS team. I coordinated and assisted in the onsite installation.

Applique da Parete

Designed and Fabricated by Gordon Huether studio

Installed in a building developed by Boston Properties located in San Francisco, CA

Materials consist of safety laminated dichroic glass, mechanically attached to walls.

Jason’s Role: This project was in fabrication when I joined the GHS team. I coordinated and assisted in the onsite installation. There were issues with the installation that required us to return and develop new installation methods. I handled R&D to determine the cause of failure, developed proper attachment methods, and worked with the GHS team to remove and replace every panel to ensure a confident and happy client.